Product Description
ReadyLift 2.25'' Front Leveling Kit | 2007-2018 Chevrolet/GMC 1500/Tahoe/Suburban/Yukon Xl/Escalade RWD, 4WD | 66-3085
Some vehicles may require the use of 15-3485 1/2" front wheel spacer when using factory wheels. The factory wheel options and difference in backspacing vary. In order to run a 285 or larger tire on the factory wheels, you may be required to use ReadyLift's 1/2" wheel spacers in front. ReadyLift is the most cost-effective and time-efficient way to lift yReadyLift's 2007-2020 GM Silverado / Sierra 1500 6-lug new body style pickup ride height by lifting the front 2.25". ReadyLift 66-3085 products do not require any permanent modification to factory parts and never compresses the factory springs or require cutting the strut studs.
ReadyLift leveling kit systems will not affect yReadyLift's factory OEM ride quality or comfort level. The 66-3085 kit includes two (2) Aluminum SST Strut Extensions and two (2) Aluminum SST Lower Strut Mount Spacers along with all necessary hardware. These are CNC-machined 6061-T6 solid billet Aluminum construction, not spot welded low grade stamped steel often found with cheaper quality kits.
NOTE: This kit will work on new 2015-2020 GM 1500 Trucks! If yReadyLift's truck is a 2017 with stamped steel upper control arms, this kit will require either aftermarket upper control arms -or- the purchase of the Aluminum factory upper control arms. The stamped steel control arms on the 2017 models are known to have issues with ball-joints becoming compromised when leveling or lifting the suspension.
NOTE: To ensure proper leveling kit fitment, using a plumb bob line (for a clean vertical) to measure from the center of the wheel hub to the bottom edge of the fender at the 12 o„clock position while the wheels are pointing straight forward. If this measurement is greater than 22" then the truck already has some factory or aftermarket front lift compared to a base truck. For distances measuring greater than 22" as described above, #66-3086 or #66-3085 should be modified to account for the pre-installed lift.
To ensure proper front lift height and suspension geometry, install the ReadyLift leveling kit WITHOUT the lower horseshoe spacer. Incorrectly using these kits on a truck with 22" or more distance may result in component interference and/or excessive wear. Some vehicles may require the use of 15-3485 1/2" front wheel spacer when using aftermarket tires on some factory wheels. The factory wheel options and difference in backspacing vary.
ReadyLift Leveling Kit Features:
- 2.25" Suspension Lift
Suggested Tire Size:
- 33" Maximum tire diameter
- 33x11.50 for no rub on a 9" wide wheel with +12 offset
- 18" - 295/65R18
- 20" - 285/60R20
- 22" - 285/50R22
- wheel spacers may be required for 285 and larger tires on factory wheels.
Kit Components
- 6061-T6 billet aluminum top mount strut extensions
- 6061-T6 billet aluminum lower strut extensions
- New strut hardware.
