Product Description
ReadyLift 2.25'' Front Leveling Kit with Upper Control Arms for Aluminum and Stamped Steel OE Arms | 2014-2018 Chevrolet/GMC 1500/Tahoe/Suburban/Yukon Xl/Escalade RWD, 4WD | 66-3086
ReadyLift has engineered the perfect solution for leveling the 2014-2018 GM 1500 trucks. GM changed the upper control arms on the GM 1500 pickups to a stamped steel upper control arm that provides minimal structural support for the factory ball joint when in a lifted or leveled scenario. This has resulted in GM mandating no lift kits or leveling kits are to be installed on these new vehicles.
Important Note: This kit is for use only with GM 1500 trucks with Stamped steel or aluminum control arm suspension. Not for use with cast steel suspension. What control arms do I have? Read this to learn more
At ReadyLift ReadyLift's goal is provide accurate and safe lifting and leveling solutions for ReadyLift's customers. ReadyLift's engineering team has developed the perfect leveling solution for these new GM 1500 trucks that includes ReadyLift's popular CNC machined billet aircraft grade aluminum 2.25" leveling kit along with strong DOM-tube steel upper control arms. These new control arms are a direct replacement for the factory stamped steel arms and includes ReadyLift's proprietary heavy-duty ball joints and an industry first maintenance free anti-resistance bushing assembly that is self lubricating and features a free-rotating inner sleeve. With this new leveling kit/control arm combination (PN 66-3086) you can now level the 2017-2018 GM 1500 trucks with assurance the vehicle will sit level, maintain the factory ride and you have the peace of mind you will never have the factory stamped steel control arm failure.
Allows for up to a 33x11.50 tire Some vehicles may require the use of 15-3485 1/2" front wheel spacer when using some factory wheels. The factory wheel options and difference in backspacing vary. Premium CNC machined billet aluminum construction leveling kit Include DOM tube steel upper control arms Features heavy duty ball joints and new maintenance free bushing assemblies that self lubricate and include "side biter" splined washers for holding alignment.
NOTE: To ensure proper leveling kit fitment, using a plumb bob line (for a clean vertical) to measure from the center of the wheel hub to the bottom edge of the fender at the 12 o„clock position while the wheels are pointing straight forward. If this measurement is greater than 22„„ then the truck already has some factory or aftermarket front lift compared to a base truck. For distances measuring greater than 22„„ as described above, #66-3086 or #66-3085 should be modified to account for the pre-installed lift. To ensure proper front lift height and suspension geometry, install the ReadyLift leveling kit WITHOUT the lower horseshoe spacer. Incorrectly using these kits on a truck with 22„„ or more distance may result in component interference and/or excessive wear. What control arms do I have? Read this to learn more OR Watch this video to learn about this kit. Some vehicles may require the use of 15-3485 1/2" front wheel spacer when using factory wheels. The factory wheel options and difference in backspacing vary. In order to run a 285 or larger tire on the factory wheels, you may be required to use ReadyLift's 1/2" wheel spacers in front.
ReadyLift Leveling Kit Features:
- Heavy-duty tubular steel upper control arms with heavy duty ball joints and maintenance free bushings Not for use with vehicles equipped with factory Air-Ride.
- Vehicles equipped with Magnetic Ride Control will require re-calibration. 1/2' wheel spacers may be required when using 285 or larger tire on the factory wheels.
Suggested Tire Size:
- 33" Maximum tire diameter
- 33x11.50 for no rub on a 9" wide wheel with +12 offset
- 18" - 295/65R18
- 20" - 285/60R20
- 22" - 285/50R22
Wheel spacers may be required with factory wheels
Kit Components
- CNC machined billet aluminum leveling kit
- DOM tube steel upper control arms with heavy duty ball joints
- Maintenance free pivot bushings
